Jan 23, 2020
2020 IDPA National Championship
Here at IDPA Headquarters we are confident that the 2020 IDPA National Championship will be a great event. Recently we have had some inquiries regarding high capacity magazines to be used at the event in Grand Junction, Colorado. A few years ago, the state of Colorado passed a law that regulated the sale, possession and use of large capacity magazines (Colorado Revised Statute 18-12-302 and 303). Shooters who had obtained these magazines preceding this law were “grandfathered” in and were not held to that same standard.
Prior to the selection of Grand Junction as the Nationals site for 2020, we investigated this issue to ascertain if this would affect our shooters coming to join us at the National Championship. The information we received in the communication from Matt Lewis, Mesa County Sheriff, convinced us that Colorado was an appropriate choice.
If you have further concerns, you may wish to investigate this on your own by reading the statute; by contacting the range, Cameo Shooting and Educational Complex, to confirm their general practice; or by using reduced capacity magazines if that makes you more comfortable.
We look forward to shooting with you in September!
Sherrif's letter MATT LEWIS- Magazine Letter (1) (1)
Jan 19, 2020
New CSO Exam to Begin Wed., Jan. 22nd
IDPA Headquarters is pleased to announce that the new CSO Exam, communicated in October, will be deployed beginning Wed., Jan. 22, 2020. Please note that current members designated in the system as CSOs will be “grandfathered” in and are required to take the test only when their SO expiration date is within 180 prior to SO to expiration and 90 days post SO expiration.
Members wishing to apply for CSO status should review the steps needed to become a CSO:
1. Prior to applying, the member must review and confirm they meet the minimum requirements as listed in Section M-15/M-15.3 of the Match Administration Rules document, located on the Downloads tab of your dashboard or here: https://www.idpa.com/idpa-matches/idpa-match-rules/.
2. If the member meets those requirements, they can apply to become a CSO by fully completing the universal application form found on their Downloads Tab on their dashboard and submitting to their AC/IPOC. The application is then submitted to the member’s Area Coordinator/IPOC for approval or denial and upon verifying eligibility, the AC/IPOC will mark the member’s profile as CSO Eligible. Some CSOs may have filled out the old application previously, but please fill out the new application so that HQ can attach it to your profile electronically.
3. The system will then show the link on the member’s dashboard for the online test that must be passed. The test consists of 30 questions and a minimum grade of 80% must be attained. The applicant will get 2 opportunities to pass the exam; if, after 2 attempt the applicant has not passed the test, they must wait until the next calendar year to try again. The member must wait at least 24 hours between attempts.
4. After passing the test, the system will update the 2 year SO expiration date. HQ will periodically review CSO eligibility based on the needs of the sport.
5. CSO candidates not following this process will be disallowed from the testing system for 1 year and considered ineligible for CSO status.
CSOs for Tiers 1 and 2 matches are appointed by the Match Director of a particular event for that match. These CSOs are not tracked by HQ and will not be marked as a CSO in the IDPA website/database.
If you have questions regarding the exam, process or eligibility, please contact your AC/IPOC.
We wish you a successful testing experience!
Jan 16, 2020
Stand with Virginia
January 16, 2020
An Open Letter to the IDPA Membership
Hello to all and I hope that your New Year is starting better than you ever hoped.
I’m sure you are all aware of the absolute travesty that is happening in Virginia. The Democrats have managed to take control of that government and are pushing for the most insane, hypocritical gun control laws that this country has ever seen. These laws will make all our IDPA members in that state criminals. They will shut down all the ranges where members and all other individuals shoot. And, they will strip law abiding citizens of their ability for self-protection.
Gov. Northham of Virginia purports that he is proposing this legislation for the protection of the citizens, but in fact, by making illegal nearly every semi-automatic pistol and rifle, this is more about control than about a compromise for public safety. Many of us have grown complacent in the lap of freedom and we think, “This won’t really come to pass, and it won’t happen in my state”. If Virginia falls, other states will follow like dominoes. As IDPA members, gun enthusiasts and Second Amendment supporters, we must support the gun owners in Virginia.
Through the establishment of Sanctuary Counties, VA Law Enforcement spread the word that they would not enforce these unconstitutional laws. In the past two days, the state government there has threatened law enforcement with unemployment, loss of benefits and pensions, so that they will be forced to confiscate firearms and enforce this legislation.
Why am I writing to you? I am asking you to join me in supporting our friends in the southeast. Monday, Jan. 20th is Lobbying Day at the VA State capital in Richmond. If you can, please join this effort. Can’t go? Donate to the organizations that are fighting this fight. Contact the elected officials in your state as well as in VA. Visit the Virginia Civil Defense League website at https://www.vcdl.org/. Share this information with our friends who care about freedom.
This is not just an issue for Virginians – it is an issue for all law-abiding gun owners in every state in the US. Thomas Jefferson said, “The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants.” Let’s do everything we can to thwart this overreach by modern-day tyrants.
Jan 14, 2020
IDPA Hoodie added to ProShop!
Another new item for 2020 has been added to the IDPA ProShop! Go check out the just added LoProfile Hoodie! Click here to start shopping.
Jan 13, 2020
2020 Postal Match Update
There has been a huge interest in shooting the 2020 IDPA Postal Match with over 84 clubs requesting the match information. We are very excited to have so much interest and participation in the match. To help things run smoothly, here are a few reminders.
- Please read and follow the match instructions. If you are unsure or have a questions, email Postal2020MD@gmail.com for assistance.
- We are having trouble with clubs directly uploading the file in to Practiscore, which then overwrites the master copy. Email email@example.com the match file with the original file name then to upload to Practiscore, you must clone your match and rename it. If you need instructions to do this, email us.
- Do not alter the format of the file. Instead of importing the file and adding the shooters and scores, we have clubs that are changing the file name before sending the completed copy to us, adding unrecognized categories and divisions and similar errors. When we try to fix the changes, these files will not merge with our match any longer. We can import them into the tablet, but only as a different match. So, these scores are then discounted. For these scores to be in the official results, they must then be corrected.
- Lastly, we have a number of unclassified and no IDPA number competitors listed in the scores currently. When we do a final run over the entries by checking classifications and membership status, we will be removing anyone who is not currently a member or currently classified from the final posting of the scores. This will be done after the April 30th deadline.
Jan 10, 2020
Range Rods are back in stock, AGAIN!
We keep quickly selling out of the SPD Tool-Range Rods. Because red and blue have been so popular, in our latest order we added in two new colors. There is now a gray and a green tool available for purchase along with the colors we previously had in stock. Click here to get them before they are gone!
Jan 07, 2020
New Keychain Added To ProShop!
Just added to the ProShop is the IDPA Target Keychain. Check it out here.
Jan 02, 2020
New 2020 Match Administration Rules V12 now available
IDPA Headquarters has posted a new Match Administration Rules document effective immediately. This version includes some updates regarding equipment check and CSO eligibility and process. The file, 2020 Match Administration Rules V12, can be found on your Dashboard on the Downloads tab.
Jan 02, 2020
5x5 Classifier bracket update
The 5x5 classifier has been very well received by IDPA shooters. Both the 72 round classifier and the 5x5 classifier have been shot many times by many shooters. HQ has collected and analyzed these classifier times. It is clear that IDPA shooters continue to improve their shooting at all levels. The 5x5 classifier brackets have been adjusted to help provide equity between the two classifiers, and reflect the improvements made by all shooters.
New brackets for classification times have been posted for the 5x5 classifier. These new brackets go into effect 1/1/2020. All 5x5 classifiers uploaded to the website 1/1/2020 and beyond will fall under the new time brackets.
The bracket is located at the link below:
Dec 23, 2019
2020 IDPA National Postal Match Stages
Click below to get the PDF version of the stages that will be used for the 2020 IDPA National Postal Match running Jan-April 30, 2020.
Postal Match Stages and Practiscore Instructions
For questions regarding the match, please email: firstname.lastname@example.org
Dec 22, 2019
IDPA 2020 National Postal Match Announced
IDPA is pleased to announce our first sanctioned National Postal Match consisting of 4 stages and a round count of 68 rounds.
This match was designed to be easily set up and run by all IDPA clubs regardless of their size and range limitations.
The stages were designed by Rick Lund & Ken Reed who are serving as the match directors for this event. We are looking to add these stages as classifiers in the future.
The match will be open to all clubs and members in good standing between the dates of January 1st, 2020 and April 30th, 2020. All Divisions are recognized.
Competitors may only enter one time in a division and may compete in all divisions for up to a maximum of four points.
After April 30th, the final scores will be posted online and the awards will be emailed to each competitor using the email provided when they registered to compete in Practiscore.
How to run the match at your club:
This match has been set up to run using Practiscore. In order to run this match at your club, download the pdf with the Stages which will be posted 12/23/19. Then send a request to: email@example.com and tell us your club name when requesting the match file. We will email you the file as an email attachment with the name: IDPANationalPostalMatch.psc¬¬¬. Import that attachment into your master Practiscore Tablet and enter the shooter information filling in the required fields. Sync other tablets as needed and score your match. When done, pull all of the scores back into your master tablet and return the match file by email using the export functions in Practiscore. After returning the match file, you can Clone the match using a different name on your tablet and then post your local scores using Practiscore. It is necessary to do this because Practiscore only uses one name for a match. You can not post multiple copies of a match using the same name.
Use the provided email for all questions and correspondence concerning this match.
We wish everyone good luck.
Dec 19, 2019
Mark 7 is Seeking to Sponsor IDPA Shooters
Lyman • Pachmayr • TacStar • Trius Traps • Butch’s • A-Zoom • Mark 7
FOR IMMEDIATE RELEASE
Mark 7 is Seeking to Sponsor IDPA Shooters
Lyman Products, Middletown, CT- November 22, 2019
Mark 7 has announced that they are looking to sponsor competitive shooters in the IDPA space for 2020. Sponsorship opportunities will be available starting the first quarter of 2020 and will be individually determined and negotiated. There is no minimum requirement when applying for sponsorship and Mark 7 invites anyone who is active in the IDPA to reach out.
If you are interested in these sponsorship opportunities please contact Chris Lindblom, Assistant Marketing Manager at Lyman Products and head of influencer relations at firstname.lastname@example.org.
About Mark 7
Mark 7® was founded on innovation. As creators of the most recent class of automated reloading presses and drives, we are committed to making the ammunition loading process safer, easier, more accurate, and more affordable. In May of 2019 Mark 7 became a Lyman product to combine premium technology with world class manufacturing.
Assistant Marketing Manager
Dec 16, 2019
|Reminder: Effective Jan. 1, 2020, Universal classifications will be removed from all member records. After that time, a member who has not obtained the classification of Distinguished Master or Master (by shooting a sanctioned match or a classifier in that specific division) who cares to compete in a sanctioned match, will be required to have shot a classifier during the previous 12-month timeframe. This information must be in their official profile online, for the same division they are competing in before being eligible to shoot the match. As of 1/1/2020, members must have a classifier or match bump based classification in the division in which they wish to shoot in order to compete in a sanctioned event.
Dec 12, 2019
Winner's Circle in next TJ
Want your award photo from the 2019 Sig Sauer PCC National Championship or World Championship to be in the next issue of the Tactical Journal? Email your photo to email@example.com and you may get featured in the Winner's Circle!
Dec 06, 2019
Range Rod tools back in stock!
We sold the last batch in about a week, but we now have them back in stock! SPDTool Range Rod is now back in stock in black, red, and blue! Click here to start shopping!
Dec 05, 2019
IDPA Stocking Stuffers
We currently have items marked down in the ProShop! There is still time to get them before Christmas. Click here to start shopping.
Nov 28, 2019
ProShop sale happening now!
Today through Dec. 2, select items are marked down in the ProShop. With every qualifying $75 purchase, we will add a free IDPA knife into the order! Click here to shop and start saving!
*For the free IDPA Knife, checkout total must be $75 before tax and shipping. US purchases only
Nov 21, 2019
IDPA Gun Test Boxes
We now have the new IDPA Gun Test Boxes in stock! We have completely redesigned the Official IDPA Gun Test box to include Carry Optics and to be more durable. Included are three sets of boxes that nest together for easy storage. A straight edge can be used to make sure the gun rests completely inside. No inserts are needed because each box is machined to be in tolerance of the IDPA rules for the divisions that the boxes represent. Click here to purchase a set.
Nov 11, 2019
Accuracy X Team shooter is most accurate at IDPA World Championships
For Immediate Release
Geoff Heath, from Folsom CA, earned the title of most accurate shooter during the recent 2019 International Defensive Pistol Association (IDPA) World Championships.
Heath, (age 40) used his PRO Series Custom 1911 from Accuracy X, to out perform competition from all over the world earning the most accurate award. The “ Worlds” are an intense competition that span several days with over 15 different stages, Heath competed in the Enhanced Service Pistol (ESP) category and bested the nearly 500 other competitors from several countries to bring home this impressive win.
“The worlds best practical shooters come to the World Championships and Geoff and his PRO Series Custom 1911 came out on top. That is quite an accomplishment. Accuracy X, Inc. is thrilled to have Geoff as a member of our Accuracy X professional shooting team and we are proud of his outstanding performance at the 2019 World Championships. ” said Steve Huff, President of Accuracy X, Inc.
About Accuracy X, Inc.
Accuracy X, Inc., is the builder of the worlds proven most accurate custom 1911s, and
precision bolt rifles. Accuracy X is also the creator of the patented and revolutionary
Multi-Sight™ system and maker of the highest quality 1911 parts and accessories.
Accuracy X focuses on innovation and proven performance. Accuracy X is world
renowned for our video accuracy tests which document the phenomenal accuracy and
performance of our products. Accuracy X products have won a multitude of National
Championships and events across many disciplines, and have been used to set numerous
National Records. 100% USA owned and operated, Accuracy X exclusively uses only
USA made parts, materials and labor. Based in Virginia, Accuracy X is an ardent
support of Second Amendment rights and the competitive shooting sports.
Visit http://www.accuracyx.com for more information